Pr. ZIDANI Mosbah
Scientific advisor at the MESRS

 

Research Director: LGEM Laboratory, University of Biskra

Faculty of Technology, University of Batna2

E-mail: m.zidani@univ-batna2.dz /zidani.sabih@gmail.com

 

Biography:

ZIDANI Mosbah currently is a Professor in the Faculty of Technology at Batna 2 University. He is the chief of a research team in the LGEM Laboratory at the University of Biskra. He is particularly interested in the development and characterization of innovative metallic materials. He was chairman of the scientific committee of the metallurgy department, member of the Scientific Council of the Faculty of Science and Technology and chairman of several doctoral training at the University from Biskra and currently he is a Scientific advisor at the MESRS and and President of the regional commission (HU) at the Cru-Est. The research axes currently developed are mainly focused on the experimental study of the microstructures, deformation and recrystallization texture of metal alloys by SEM, EBSD, RX and neutron diffraction

Pr. Zidani is the author of over forty five (45) international scientific papers (indexed by: Thomson Reuters /Scopus -Elsevier). He has over 160 participation in national and international conferences in the last ten years, which he has presented dozens national and international plenary conferences as an Invited Speaker. Pr. Zidani has chaired and organized several national and international scientific events and also member of the scientific committee in more than fifty (50) national and international scientific events. He is the main Editor of the special issue of journals (DF,DDF and SSP indexed by: Scopus -Elsevier) of the scientific.net house in Switzerland and also Editorial Board member and Evaluation expert (Reviewer) in several high level journals (Steel research international, JERA, JNanoR, Journal of Molecular Liquids, JMES…. indexed by: Web of Science and Scopus-Elsevier).

Prof. ZIDANI has directed and discussed fourteen (14) doctoral theses and more than thirty five (35) master’s degree and final projects for engineering students. Supervision of Master START-UP projects (according to decree 1275) supported in July and September 2023, in collaboration with an industrial partner from a vital national socio-economic sector and in cooperation with research teams from  laboratories of Algerian universities

Prof. ZIDANI has directed several national research projects (CNEPRU, PNR, PRFU, etc.) with industrial partners, particularly public, in this case: ENICAB-Biskra and TREFISOUD-El Eulma (Sétif), with several national research centers and laboratories: Advanced Technology Development Center (CDTA), Baba Hassan-Algiers (Algeria ), Materials Science and Engineering Laboratory (LSGM),USTHB-Algiers ( Algeria), Center for Scientific and Technical Research in Physico-chemical Analysis (CRAPC), Tipaza (Algeria) and with the following international laboratories and institutions: Laboratory Synthesis, Properties and Modeling of Materials (SP2M), Léon Brillouin Laboratory (LLB)/CEA in France, Bioceramics and Theoretical Atomic laboratory, Department of Physics, Faculty of Science, Firat University-Elazig, Turkey and Functional Nanocomposite/Hybrid, Low Dimentional Functional Material Group,Research Center for Advanced Material, National Research and Innovation Agency (BRIN) Indonesia

Biographie:

ZIDANI Mosbah est actuellement Professeur à la Faculté de Technologie de l'Université Batna 2. Chef d’équipe de recherche au laboratoire LGEM de l'Université de Biskra, il s’intéresse particulièrement à l’élaboration et la caractérisation des matériaux métalliques innovants. Il a été président du comité scientifique de département de métallurgie, membre du Conseil scientifique de la Faculté des sciences et technologies, président de plusieurs formations doctorales à l'Université de Biskra et actuellement il est un conseiller scientifique auprès de la Cru-Est et le MESRS. Les axes de recherche développés actuellement s’articulent principalement sur l'étude expérimentale des microstructures, de la texture de déformation et de recristallisation des alliages métalliques par SEM, EBSD, RX et diffraction des neutrons.

Pr. Zidani est l'auteur de plus de quarante cinq (45) articles scientifiques internationales (indexés par: Thomson Reuters et Scopus-Elsevier). Il a participé à plus de 160 conférences nationales et internationales au cours des dix dernières années, auxquelles il a présenté des dizaines de conférences nationales et internationales en tant que conférencier invité. Pr. Zidani à présidé et organisé plusiuers manifestations scientifiques nationales et internationales et egalement membre du comité scientifique dans plus de cinquante (50) manifestations scientifiques nationales et internationales.  Il est le rédacteur en chef de plusieurs volumes spéciaux dans des revues internationales (DF, DDF et SSP indexés par: Scopus -Elsevier) de l’éditeur Scientific.Net (Suisse) et également membre du comité de rédaction et expert (Reviewer) dans plusieurs revues de haut niveau ( Steel research international, JERA, JNanoR, Journal of Molecular Liquids, JMES….) Indexées par: Web of Science et Scopus-Elsevier).

Pr. Zidani a dirigé et fait soutenir quatorze (14) thèses de doctorat et plus d’une trentaine de mémoires de master et de projets de fin d’étude d’ingénioratEncadrement des projets de Master START-UP (selon l’arrêté 1275) soutenus en juillet et septembre 2023, en collaboration avec des partenaires industriels de secteur socio-économique national vital et en coopération avec des équipes de recherche des laboratoires des universités algériennes.

Pr. Zidani a dirigé plusieurs projets de recherche nationaux (CNEPRU, PNR, PRFU ....) avec des partenaires industriels, notamment publics, en l’occurrence ENICAB-Biskra et TREFISOUD-El-Eulma (Sétif), avec plusieurs centres et laboratoires de recherche nationaux : (CDTA), Baba Hassan-Alger (Algérie), Laboratoire des sciences et génie des matériaux (LSGM), USTHB-Alger (Algérie), Centre de recherche scientifique et technique en analyse physico-chimique (CRAPC), Tipaza (Algérie) et avec  les laboratoires et institutions internationaux suivants : Laboratoire Synthèse, Propriétés et Modélisation des Matériaux (SP2M) , Laboratoire Léon Brillouin (LLB)/CEA en France, Laboratoire Biocéramique et Atomique Théorique, Département de Physique, Faculté des Sciences, Université Firat-Elazig, Turquie et Nanocomposite Fonctionnel/ Hybrid, Groupe des matériaux fonctionnels de faible dimension, Centre de recherche sur les matériaux avancés, Agence nationale de recherche et d'innovation (BRIN), Indonésie.

 

More details on scientific productions,animations and collaborations:Please consult my updated CVfor the last ten years  

    Administrative Office Positions
  • Assistant Chief of Department: Department of Metallurgy, University of Biskra (from 15/10/2004 to 31/9/2005)
  • Member in Scientific Committee of Department of Metallurgy, University of Biskra (from 1/10/2004 to 31/6/2007)
  • President of Scientific Committee: Department of Metallurgy, University of Biskra (from 28/10/2007 to 31/6/2009)
  • Head of Research Team: Study and Elaboration of Metallic Materials, Laboratory of Energetics Engineering and Materials, LGEM University of Biskra (from 14/4/2012 to present)
  • Member in the Committee of Doctoral Training (3rd Cycle) entitled: Industrial Metals (Ministerial decree n: 16 of 30/9/2015)
  • Chairman of the committee of Doctoral Training of Doctoral Training (3rd Cycle) entitled: Materials and Structures (Ministerial decree n: 935 of 31/07/2016)
  • Member in the Committee of Doctoral Training (3rd Cycle) entitled: Industrial Metals (Ministerial decree n: 834 of 27/07/2017: Renewal)
  • Legal expert accredited to the court of Batna: (Ministerial decree n: 10690 of 12/03/2017)
  • Member of the Scientific Council of the Faculty of Science and Technology, University of Biskra (from 29 /06 / 2017 to 29/12/2019)
  • Responsible in the Committee of Doctoral Training (3rd Cycle) entitled: Metallurgy, Specialty: Shaping of metals and alloys (Ministerial decree n: 1434 of 21/08/2019)
  • Member in Scientific Committee of Department of Science and Technology, University of Batna 2 (from 07/07/2020: Ministerial decision n °: 429)
  • President of the regional commission (HU) - Regional Conference of Eastern Universities (CRU-Est), (from 08/11/2021 Ministerial decree n: 1185)
  • Scientific advisor  at the MESRS (from 22/06/2022 Ministerial decree N ° 705 )
  • Member of the technical committee for monitoring start-up projects of the faculty of technology, University of Batna2, (from 13/12/2022, decree n: 48).

 

Skills and research areas

 

  • Experimental study of texture and microstructure (deformation / recistallization) by: EBSD, DRX and neutron diffraction

  • Surface engineering and coatings (elaboration, characterization, wear and corrosion)

  • Microstructural and mechanical properties of metallic materials (ferrous and nonferrous)

  • Experimental study of the reaction (precipitation/ dissolution) in metal alloys

  • Study and Elaboration of Metallic Materials

 

 

 

 
Distinction :

 

Thanks and homage for the best reviewer 2019 (Pr. ZIDANI Mosbah) : Top JNanoR Reviewer 2019 : Special huge thank to our reviewer for Journal of Nano Research (JNanoR) / ISSN web1661-897.https://www.scientific.net, of the scientific.net house in Switzerland (indexed by: Thomson Reuters /Scopus -Elsevier)

Recognition and distinction by the international association of researchers in mechanics and energy (AICME) as part of the activities of the ICME2023 international congress, Sousse, Tunisia , December 20-23 (2023)