Publications

This study is one of the first works which examined the assessment of heavy metal contamination of pavement-side soils in Algeria. It deals with the section of National Highway 3 (RN3), which crosses the wilaya of Batna. In the environment of sampling sites there is no industry or dangerous activity on the environment, the heavy metals addressed in this study are (Pb, Cu, Cr, Fe, Ni, Zn), their origin being road traffic. The objectives of this study were to: (1) Determine the concentrations of heavy metals in road dust; (2) Identify the sources of different heavy metals in soils and road dust; (3) Exploring the extent of heavy metal pollution in neighbouring soils. To this end, 33 samples were collected, including 03 road dust and 30 soil samples over different distances from 1m to 80m. The samples were analyzed by FRX. Results indicated that concentrations in road dust were higher than in soil. The distribution of heavy metal concentrations in dust is Fe>Pb>Zn>Cu>Cr>Ni, and the distribution in the ground is Fe>Pb>Cu>Zn>Cr>Ni in the direction of Biskra and in the opposite direction and decreases away from the road, while the distribution in the central solid ground is Fe> Cu>Cr>Pb>Zn>Ni. Climatic conditions such as wind, rainfall, temperature, humidity and the nature of the terrain were also significantly related to their enrichment in these roadside soils. The enrichment factor (EF) and the geo-accumulation index (Igeo) were calculated, as well as all elements with a (EF) that ranges from moderate to high to extremely contaminated, reflecting the high anthropogenic load of these metals in the study area and the results of the Igéo accumulation indices confirm the results obtained for the enrichment factor (EF).

This article is particularly interested in the numerical modeling of water hammer in a hydraulic circuit, taking into account the prevailing water temperature. The study concerns the propagation velocity of the wave and the amplitude of unsteady phenomena encountered in the circuit, as well as the severity and collapse of cavitations that are also considered as major risks. To conjecture the consequences of these phenomena, we were led to simulate a single-phase and two-phase transient flows in a hydraulic copper pipe system in a temperature range of 4–95 °C. To do this, we have developed a solver for the dynamic and continuity equations’ resolution. The method of characteristics is chosen for its capacities to solve these equations. Its application shows that it is robust and adapted to the problem studied. Two cavitations’ models and column separation have been incorporated; in this case, the Discrete Vapor Cavity Model (DVCM) and the Discrete Gas Cavity Model (DGCM). Moreover, in addition to the classic models of quasi-stable friction, of which the models of unsteady friction have been included, like the one based on the instantaneous acceleration proposed by Brunone and the one proposed by Vardy & Brown based on the convolution integral. Although single-phase and two-phase water hammers do not behave in the same way, the results obtained with these models show that the temperature produces a great effect on the hammer.

The Bouteldja coastal aquifer is one of the most important groundwater resources in North eastern of Algeria. The region is under a sub-humid climate with an average rainfall of 600-880 mm/y. The unconfined aquifer is constituted of Quaternary sands formations. The hydrogeological characteristics were determined based on previous reports. A very important inflow recharges the sandy aquifer in the Southeastern boundary, in relation to a fault network system linking the aquifer and the Obeira Lake area. Another inflow is observed at the Southern boundary in relation to the exchanges with the alluvial aquifer of Bouteldja. The purpose of the present study is to provide an initial assessment of the groundwater flow and water budget of this aquifer. To achieve this goal, a one-layer groundwater flow numerical model was developed using the MODFLOW-2005 code and the FREEWAT software, using the available data. The model was run in steady state conditions. Calibration was achieved using the piezometric measurements of May 2018 as calibration target. After several trials of manual calibrations, the model successfully simulated the groundwater flows directions and heads. Calibration efforts lead to an acceptable concordance (for the purpose of this study) between the estimated and calculated hydraulic conductivity and piezometric heads, except at the Eastern border. The analyses of the simulated inflow budget shows that aside the rainfall infiltration, exchanges with surface water bodies, the adjoining alluvial aquifer and the fault system provide a relevant amount of water. This significant recharge needs additional investigations. This numerical modeling exercise using MODFLOW, the FREEWAT software and GIS reached the objective of a preliminary description of the groundwater flow and it represents an acceptable starting point for more thorough hydrodynamic characterization of the Bouteldja coastal aquifer.

The Bouteldja coastal aquifer is one of the most important groundwater resources in North eastern of Algeria. The region is under a sub-humid climate with an average rainfall of 600-880 mm/y. The unconfined aquifer is constituted of Quaternary sands formations. The hydrogeological characteristics were determined based on previous reports. A very important inflow recharges the sandy aquifer in the Southeastern boundary, in relation to a fault network system linking the aquifer and the Obeira Lake area. Another inflow is observed at the Southern boundary in relation to the exchanges with the alluvial aquifer of Bouteldja. The purpose of the present study is to provide an initial assessment of the groundwater flow and water budget of this aquifer. To achieve this goal, a one-layer groundwater flow numerical model was developed using the MODFLOW-2005 code and the FREEWAT software, using the available data. The model was run in steady state conditions. Calibration was achieved using the piezometric measurements of May 2018 as calibration target. After several trials of manual calibrations, the model successfully simulated the groundwater flows directions and heads. Calibration efforts lead to an acceptable concordance (for the purpose of this study) between the estimated and calculated hydraulic conductivity and piezometric heads, except at the Eastern border. The analyses of the simulated inflow budget shows that aside the rainfall infiltration, exchanges with surface water bodies, the adjoining alluvial aquifer and the fault system provide a relevant amount of water. This significant recharge needs additional investigations. This numerical modeling exercise using MODFLOW, the FREEWAT software and GIS reached the objective of a preliminary description of the groundwater flow and it represents an acceptable starting point for more thorough hydrodynamic characterization of the Bouteldja coastal aquifer.

Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a “POWER INSPECT” measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.

The most important components used in aerospace, ships, and automobiles are designed with free form surfaces. An impeller is one of the most important components that are difficult to machine because of its twisted blades. This research book is based on the premise that a STEP-NC program can document “generic” manufacturing information for an impeller. This way, a STEP-NC program can be made machine-independent and has an advantage over the conventional G-code-based NC program that is always generated for a specific CNC machine. Rough machining is recognized as the most crucial procedure influencing machining efficiency and is critical for the finishing process. The research work reported in this chapter focuses on introduces a fully STEP-compliant CNC by putting forward an interpolation algorithm for non uniform rational basic spline (NURBS) curve system for rough milling tool paths with an aim to solve the problems of kinematic errors solutions in five axis machine by neural network implementation.

Cette thèse propose de concevoir et réaliser un système de reconnaissance automatique de la parole destiné à commander à distance un système audiovisuel à savoir : un Téléviseur. Le système global "bout en bout" se scinde en deux blocs : le premier cherche à extraire les meilleures caractéristiques à partir du signal vocal d’entrée. A cet effet, plusieurs techniques d’extraction de caractéristiques vont être examinées et testées. Concernant le deuxième bloc, nous mettons en évidence une multitude de techniques relevant du domaine de l’apprentissage profond, dont l’impact est d’adapter et de d’affirmer les caractéristiques extraites pour donner en final la classe de l’énoncé. La validation des différentes méthodologies présentées dans cette thèse a été effectuée sur la base de deux jeux de données réelles, le premier est tenu compte pour une évaluation initiale, tandis que le second est con\c cu exclusivement pour le système ASR proposé dans cette thèse. Les résultats obtenus ont certifié l’efficience des approches proposées. Le défi pour les travaux futurs est d’évaluer ce type de système dans des conditions plus réalistes avec des signaux vocaux issus des milieux bruités.

• The study of the phenomenon of flooding in an urban environment requires the integration of the city in its physical context, in this case the entire impluvium. Thus, the consideration of all the hydrological, morphometric and physical characteristics (topography, lithology, land cover...). In order to put in place appropriate measures to improve urban resilience and protect the population and their property in the capital of Algeria (City of Algiers), a hydrological modeling must be carried out upstream to evaluate the hydrological response of the watershed. This modeling was done using the auxiliary tool HEC-GEO HMS, an extension that works in a GIS environment (ArcGIS).
• Copyright of Annals of the University of Oradea, Geography Series / Analele Universitatii din Oradea, Seria Geografie is the property of University of Oradea, Department of Geography, Tourism & Territorial Planning and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.

The main objective of this study is to establish a perspective orientation of urban growth in an arid region (Biskra and its neighboring oases) in south east Algeria by mobilizing the capacities of attractiveness. Taking into account climatic parameters (wind speed and temperatures) and physical parameters (land cover, slopes, and distance from roads), our approach is based on remote sensing techniques of satellite data classification and Geographic Information Systems for spatial analysis. By means of a multi-criteria analysis a decision support map of sites suitable for future urban dynamics was carried out. The results obtained show that 48% (or 71,782.25 ha) of the study area is located on land with very low sensitivity to urbanization. 9.45% at high sensitivity, 29.13% at medium sensitivity, while 13.41% at low sensitivity. The medium sensitivity zone occupies a considerable area estimated at 29.13% (a total of 43,577.58 ha). Spatially, this is reflected in uncontrolled urban sprawl to the detriment of oases and agricultural land, or land not suited to the requirements of climatic comfort in arid regions. This urbanization sensitivity map forms the basis of the prospective design of an urban model adapted and appropriate to the conditions of the oasis ecosystem through the integration of other climatic parameters.

Modern wind turbines operate in continuously transient conditions, with varying speed, torque, and power based on the stochastic nature of the wind resource. This variability affects not only the operational performance of the wind power system, but can also affect its integrity under service conditions. Condition monitoring continues to play an important role in achieving reliable and economic operation of wind turbines. This paper reviews the current advances in wind turbine condition monitoring, ranging from conventional condition monitoring and signal processing tools to machine-learning-based condition monitoring and usage of big data mining for predictive maintenance. A systematic review is presented of signal-based and data-driven modeling methodologies using intelligent and machine learning approaches, with the view to providing a critical evaluation of the recent developments in this area, and their applications in diagnosis, prognosis, health assessment, and predictive maintenance of wind turbines and farms.

Modern wind turbines operate in continuously transient conditions, with varying speed, torque, and power based on the stochastic nature of the wind resource. This variability affects not only the operational performance of the wind power system, but can also affect its integrity under service conditions. Condition monitoring continues to play an important role in achieving reliable and economic operation of wind turbines. This paper reviews the current advances in wind turbine condition monitoring, ranging from conventional condition monitoring and signal processing tools to machine-learning-based condition monitoring and usage of big data mining for predictive maintenance. A systematic review is presented of signal-based and data-driven modeling methodologies using intelligent and machine learning approaches, with the view to providing a critical evaluation of the recent developments in this area, and their applications in diagnosis, prognosis, health assessment, and predictive maintenance of wind turbines and farms.

Closed greenhouse systems optimize internal climatic conditions for both reducing energy loss and high-quality yields. Nevertheless, careful monitoring of the parameters of the microclimate requires a better understanding of the thermal phenomena that coexist at the same time inside the greenhouses. In the present study, the surface radiation effect on the natural convection in the greenhouse was investigated numerically based a turbulent unsteady model. The k-ε model was adopted for the turbulent flow and the discrete ordinate (DO) method for the radiation heat transfer. Assuming a no isotherm conditions at the floor and roof faces of the greenhouse and for a Rayleigh number ranges from 0.6×10¹⁰ to 2.3×10¹⁰. The results showed a strong radiation effect on the thermal behavior near the walls and considerably reduces the flow dynamics within the greenhouse. The contribution of the radiation heat transfer on the total Nusselt number at least 50% greater than that without. The results obtained for the selected values of Rayleigh numbers are in good agreement with the experimental data of the literature.

In this paper, we propose a full-wave analysis for characterizing the resonant frequencies and bandwidths of high-temperature superconductor inverted microstrip printed on anisotropic substrates. Our proposed approach is based on Galerkin procedure in the Fourier transform domain (FTD) combining with the complex resistive boundary condition. With the use of suitable Green's functions in the FTD, the analysis is performed for the case where the superconducting rectangular patches printed on anisotropic substrate. The numerical results obtained using the proposed approach are compared with previously published numerical results computed by means of the electromagnetic simulator “IE3D software”. These comparisons were very good, which prove the correctness and the validity of the proposed method. It is found that the optical properties combined with optimally chosen structural parameters of anisotropic materials can be maintaining control of the resonant frequency and exhibiting wider bandwidth characteristics.

We establish global-posedness in time for the viscous Boussinesq equations in two dimensions of space with temperature-dependent diffusivity in the framework of a smooth vortex patch. We also provide the inviscid limit for velocity, temperature, and associated flow toward the system studied very recently in \cite{Paicu-Zhu} as soon as the viscosity goes to zero, and quantify the rate of convergence.